Vertical Screw Type Injection Moulding Machine
Home › Products › Moulding Machine › Vertical Screw Type Injection Moulding Machine
Vertical Screw Type Injection Moulding Machine
MOQ : 1 Piece
Product Details
Clamping Force
60 Ton To 140 Ton
- Standard Features of DL-Series
- Hydraulic Vane Pump For Low noise Operation
- Electro-propotional Valve
- PID Temperature Controller
- PLC Base Controller
- Ceramic Heater
- Liner Scale For Accurate Moulding
- Twin Cyl. Inj. Unit For Load Distribution
- High torque hydraulic motor for screw drive
- Oil Cooler for long life of Hyd. System
- SS Hopper with Material removal
Clamp
- Adjustable individual pressure setting of each stage
- Position based accurate switching and control and pressures
- Programmable clamp position with its feedback by linear transducer
- Proportional clamp position with 4 closing and opening speed
- Stage wise actual time display
- Low pressure mould protraction with high mould safety
- High tensile, hard chrome platted tie bar
Injection
- Injection in 4 stage & 4 stage holding
- Gas nitride screw barrel with standard L/D ratio
- Injection unit sliding on hard chrome steel ground tie bars
- Actual rpm display on screen ( optional )
- Linear position transducer assistance for real out and accurate control
- Pid control algorithms for barrel heating drive
- High torque hydraulic motor for screw drive
- Automatic / manual suck back system
Temperatur control
- Accurate PID temperature controls settable through operator panel for nozzle and barrel zones
- Display of individual zone heater detection
- High/low temperature alarm bands
- Soak timer for cold start protection
- MCB control each heating zone
- Ceramic heater for power saving
Hydraulics
- Hydraulic controlled vane pump
- Proportional valve for pressure and flow control with electronic feedback.
- Continuous oil filtration with 10 micron filter
- Pre heating circuit for hydraulic oil
- Component easily accessible for maintenance purpose
- Resiliently mounted hydraulic pump
- Sealed oil tank with oil indicator
- 24 volt DC solenoid Valve.
- Overload protection for pump motor
Controls
- Dedicated and integrated HMI Panel
- Multi- Microprocessor control
- Modular design concept
- 320 x 240 monochrome lcd screen
- Alpha numeric key pad
- Soft keys for fast access to select menus
- 50 mould data storage with alpha numeric text
- Continuous process monitoring
- Customized set up
- Individual keys for manual functions
- Complete digital up & display
- 100 alarms stores in alarm history
- I/O diagnosis
Other Molding Machine
- Vertical injection moulding machine
- Vertical screw type toggle injection moulding machine
- Screw type moulding machine
- Vertical Screw Type Injection Moulding Machine
- Vertical Screw Injection Moulding Machine
- Plc Vertical injection moulding machine
VR - Series
| Shot Weight (PS) |
Gm. |
30 |
60 |
100 |
150 |
200 |
250 |
300 |
500 |
750 |
1000 |
| Screw Dia |
mm |
25 |
30 |
35 |
35 |
40 |
45 |
48 |
55 |
60 |
65 |
| Inj. Screw Stroke |
mm |
85 |
110 |
130 |
200 |
200 |
200 |
210 |
265 |
325 |
375 |
| Screw Speed |
RPM |
20-250 |
20-250 |
20-210 |
20-210 |
20-180 |
20-180 |
20-180 |
20-150 |
20-150 |
20-150 |
| Screw L/D Ratio |
|
18 |
18 |
19 |
19 |
17 |
17 |
19 |
19 |
20 |
20 |
| Max. Mould Height |
mm |
150 |
175 |
200 |
215 |
230 |
275 |
300 |
325 |
350 |
375 |
| Max. Opening |
mm |
175 |
175 |
250 |
250 |
270 |
290 |
300 |
310 |
325 |
370 |
| Clamping Force |
Kg/cm2 |
120 |
120 |
125 |
125 |
130 |
130 |
130 |
140 |
140 |
150 |
| Heating Capacity |
kw |
0.7 |
0.85 |
1.5 |
1.8 |
2.1 |
2.6 |
2.8 |
3.5 |
4.5 |
5.5 |
| No. Of Pyrometers |
Zone |
3 |
3 |
4 |
4 |
4 |
4 |
4 |
5 |
5 |
0.5 |
| Oil Capacity |
Ltr. |
90 |
90 |
130 |
130 |
180 |
180 |
180 |
225 |
250 |
300 |
| Electric Motor |
hp |
5 |
5 |
7.5 |
7.5 |
10 |
10 |
10 |
12.5 |
15 |
20 |
Piece
